5 Problem-Solving Hacks to Fix Windows 7 Black Screen with Cursor | Latest World News - Breaking News & Top Stories
5 Problem-Solving Hacks to Fix Windows 7 Black Screen with Cursor

5 Problem-Solving Hacks to Fix Windows 7 Black Screen with Cursor

Are having problems loading Windows 7 on your computer? One of the most common issues with Windows 7 is that it gets stuck on a black screen with a cursor but Windows Explorer fails to load which leaves you with just a cursor and nothing to click on. 

This can be frustrating especially if you have important things to do on your computer. But, there’s no need to worry. On this guide, we are going to show you a few tips and tricks on how you can get Windows 7 to continue booting up and eliminate the black screen with cursor problem. 

Let’s get started. 

What Causes the Black Screen with Cursor Problem in Windows 7?

There are a couple of reasons as to why Windows 7 encounters this problem. Do know more about the issue, you can check out below the list of the possible causes to this kind of problem on Windows 7.

  • External Devices Connected to Your Computer. 
  • Improper Windows Configuration.
  • Outdated Display Drivers. 
  • Corrupted System Files. 

Now, to get started on actually fixing your computer you can check out the methods below that can work to eliminate the Windows 7 black screen with cursor problem on your computer. 

Method 1: Disconnect All External Devices

Some of the devices connected on your computer may cause the black screen problem on Windows 7. To fix this, you can try turning on your computer without any hardware connected to it. 

1. Turn off your computer and disconnect all the devices connected to it like keyboards, mouse, headset, and web cameras. 

2. After that, turn on your computer and see it will continue booting Windows 7. If your computer successfully booted, then you can proceed to the next step below. However, if it is still stuck on the black screen, you can skip the next step and jump to the next method below. 

3. Lastly, plug in your devices one by one and restart your computer to see which device causes the black screen issue on Windows. 

Once you have identified the device that causes problems on Windows, you can try installing the proper driver for that device if applicable. Also, if the problem continues when you plugin that specific device on your computer, it is best that you buy a replacement to avoid problems in the future. 

For the next methods, it will require you to start your computer on Safe Mode. To do this, restart your device and hold on the Shift key while tapping the F8 button on your keyboard. Now, on the Advanced Boot Options select Safe Mode and hit Enter

Method 2: Run System File Checker on Safe Mode. 

Once you have booted your computer in Safe Mode, you can try running Window’s system file checker to see if any corrupted Windows files cause the black screen with cursor problems on your computer. 

Check out the steps below to guide you through the process.

1. On Safe Mode, press on Windows Key + R and type CMD to launch Command Prompt on your computer. 

2. After that, type sfc /scannow and hit Enter

3. Lastly, wait for the scan to finish as System File Checker attempts to fix and restore corrupted system files on your hard drive. 

After that, restart your computer normally to see if the Windows 7 black screen with cursor problem is fixed. 

Method 3: Run System Restore on Safe Mode. 

Here’s another tool that can help you in fixing the black screen issue on your computer. System Restore is a built-in Windows tool that allows you to restore your Windows System from the last known working condition. 

To use System Restore on Windows, follow the steps below. 

1. On your computer, press on Windows Key + R and type rstrui.exe and click on OK.

2. After that, click on Next.

3. Lastly, select the latest restore point on your computer and click on Next to start restoring your computer to the last known working state. 

Now, restart your computer to see if the Windows 7 black screen issue was resolved by System Restore.

Method 4: Update Graphics Driver. 

Black screen issues on Windows can also be caused by a corrupted graphics driver. To ensure that your graphics driver is up to date and installed properly you can try checking for an update on Device Manager.

Follow the steps below to guide you on the process. 

1. On your computer, press on Windows Key + R to open the Run Command Box

2. After that, type devmgmt.msc and hit Enter to launch the Device Manager

3. Next, inside the Device Manager click on Display Adapters to expand it. 

4. Right-click on your graphics driver and select Update

5. Lastly, follow the on-screen prompts from the Windows Update Wizard

After updating your graphics driver, you can try closing safe mode and start your computer normally to check if the issue is already fixed. 

Method 5: Manually Start Windows Explorer. 

If you are stuck on a black screen on Windows with a cursor, it is possible that the Windows Explorer does not continue to load on your computer. In this case, you can try starting Windows Explorer manually on your computer. 

To do this, you can follow the step-by-step guide below. 

1. Once you are on the black screen on your computer, press CTRL + SHIFT + ESC key on your keyboard.

2. This will launch the Task Manager. Now, click on File from the navigation menu at the top.

3. Lastly, click on Run New Task, then type explorer.exe. Now, click on Ok to launch Windows Explorer

After that, Windows Explorer will start loading on your computer and you will see your Start menu and Desktop icons to appear. 

This wraps up our guide on how to fix Windows 7 black screen with cursor issues on your computer. We hope this article helped you in fixing this specific issue on your computer and if you liked it, we would highly appreciate it if you can share it with your friends on social media. 

0 0 votes
Article Rating
Would love your thoughts, please comment.x